Joined in 2023 
82 
63 About this deal
The CP240 is a double flange eartip. Double flange eartips are useful for listeners who have larger ear canals and have a hard time getting a good seal. They can also provide improved isolation in general. On the CP240, the SpinFit pivot comes in between the first and second flange, to provide flexibility at the top for the second flange. The CP100 has a 4mm opening and is the all-around, works with just about anything tip. It’s small enough to work with IEMs with smaller nozzles, like those on 64 Audio’s line of IEMs, but still big enough to stretch onto Noble or Empire Ears wider nozzles. The challenge is that with bigger models, you’ll generally want a little more room to work with, rather than having to fight to get the tips on and off, and potentially damage them. They are equivalent to the CP100 in every respect, except for sound: the new material makes treble a bit stronger overall. SpinFit CP145 For neutral tonality with emphasis in bass, midrange and vocal. For clarity and bigger soundstage, choose CP-240. The SpinFit CP800 were the only ones I could not try due to not having compatible earphones: they are made for super-thin nozzles like those used by Shure, Westone and Etymotic. At just 2 mm wide, the inner bore is too narrow to house earphones with 4 mm nozzles (believe me, I tried). I will update this review as soon as I lay my hands on compatible earphones, but I expect them to behave exactly like all other eartips in this list. SpinFit CP1025
As a last bit, the silicone is actually medical grade, so the added benefit is you shouldn’t have issues with allergies and other adverse reactions. SpinFit CP500
SpinFit CP1025
Everything else is the same as on “normal” silicone eartips, which is also why the SpinFit tips are so great: you get all the pros (good isolation, washability and basically eternal durability, wide compatibility) with none of the cons. The main difference between the W1 and the other eartips by SpinFit is the dual-density silicone used to make the inner bore. It has a wave shape, hence the name. This makes the inner bore stiffer, plus it also makes it easier for it to grip earphones’ nozzles and therefore offers more stability. It is therefore advised to use the W1 for especially large and heavy earphones, as it will be difficult for the tips to come off. The SpinFit CP145 are much like the CP100, but they have a smaller top so they go better inside the ear. The difference is not dramatic in terms of size, but the fit is quite different. The general shape is again ogival, with a height of of 10.1 mm and a with of 13.5 mm. With an inner diameter of 4.5 mm, the CP145 can fit earphones with nozzles up to 5.5/6 mm in diameter: that means that even IEMs with larger soundports, like the Tin HiFi P2, Shanling ME500 Platinum, Fearless Audio S10 Genie or Moondrop A8 will fit correctly, though the silicone will stretch a bit. There are just three sizes: S, M and L. In this review, I will be discussing the Simgot EM6L, comparing it with the Xenns Mangird Top and QKZ HBB Khan. I have tested the EM6L using the Moondrop Moonriver 2 Ti and Fiio Q3 Dac Amp.
CP360 and CP1025 are designed for TWS earphones. CP360 is designed to provide a deeper fit, while CP1025 is more shallow. While both will fit on most TWS earphones, some charging cases may not be compatible with the CP360. CP1025 is also available with adapters for Apple AirPods Pro and Samsung Galaxy Buds Pro. W1 I also noticed that the EM6L is quite dependent on the source material and the DAC amp connected to it. When I connect it with my Moondrop Moonriver 2 Ti, the mids and trebles are a bit smoother and more forgiving. Whereas with my Fiio Q3, songs with bad recordings or sibilant sounds come through as such. With the Xenns Top, either connected with Moonriver 2 Ti or Fiio Q3, songs with bad recording or sibilant in nature do not sound as bad as they are. Munich, Germany. Head-Fier since 2019. Mostly lurking around r/headphones as u/kmmbd and a very active member in local head-fi community since 2015. Got into head-fi in mid-2019 under the username kmmbd, and has been reviewing audio gears sporadically on his personal Medium blog since 2018. His introduction to portable audio was through a Walkman cassette-player in his pre-teens, and music has been his getaway ever since.He harbors a minor OCD regarding the tagging and organization of his music library (which is all digital on a local NAS). Also, spends too much time custom-theming his desktop Music Player for no apparent reason.In real life, he’s a Bangladeshi living in Munich and currently doing his MS in Computer Science, majoring in Computational Biology. He’s a penchant for the academia and research, though life is strange so he’s still unsure how things will turn out in the long run. The mids are clean and uncolored, but I still prefer the mids from the Xenns Top because of its technical abilities, clarity, and control. When compared to the Khan, I prefer the Khan's mids because of the dynamic driver tonalities. Both the Xenns Top and the Simgot EM6L have a balanced armature tone to them.The peculiarity of the CP100 is that they are tall (9.9 mm), but they are actually quite wider at 13.3 mm. This means that they won’t need to go very deep to seal off your ear canal and therefore will also be fine for earphones with short nozzles. Thanks to this good seal, bass is well extended and controlled, while the rest of the range comes out as well balanced and with no particular colouration and the same sensation of good control as in the lower area. As a whole, the sound is mostly unaltered and this also includes the “bad” side of this, as the tips won’t reduce peaks e.g. in the treble area. These eartips are meant for true wireless earpieces. If you find SpinFit CP-350 too short, this one fits between regular CP-145 and CP-350. Bass and low-mids are stronger than CP-350. Vocal is forward with good clarity.
Great Deal 
New Comment